Raumer Multi Monti Screw hexagon 13mm - 7.5mm
|
Βίδα Multi Monti. |
|
| Ομάδα: | Μεταλλικά αγκύρια |
| Υπό-ομάδα: | Βύσματα MULTI-MONTI |
| Product Brand: | Raumer Climbing |
| Activity: | |
| SKU: |
SKU:
[RA-288-289-290][7361][11-1-] | |
| EAN Code: | ||
| MPN Code: |
|
|
| Price: |
|
In stock
This screw is particularly suitable for anchor placements on soft rock (sandstone, soft limestone etc).
The shank's considerable length ensures an excellent hold along the entire length of the hole and, much like a tapping screw, guarantees good strength distribution without exerting tension on the surrounding structure.
The only proviso is to use a bit which removes dust fragments from the drill hole, given that this must be 6mm width to 100mm depth.
To screw, use a 13mm hex key.
General Information:
MULTI-MONTI anchors are produced and patented by the German company HECO SCHRAUBEN KG & Co.
It is an innovative self-threading screw system and is highly resistant and practical.
The first part of the Multi-Monti thread is characterised by thread serration / teeth.
When screwed, the anchor cuts into the material and creates the space for the rest of the screw.
Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the material, reducing the risk of damage or breakage.
The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused.
This procedure should not be employed more than three times on rock and only once on granite.
The HECO-MULTI-MONTI system is very simple to install:
1) Drill into the supporting material (rock, concrete, solid bricks) with an appropriately sized bit (see table).
2) Clean the drill hole.
3) Screw in the anchor, fixing it to the chosen plate.
HECO-MULTI-MONTI was the first screw anchor to receive the highest level of the European Technical Approval ETA:
-Option 1 for use on cracked and uncracked concrete.
HECO-MULTI-MONTI is also the only screw anchor with such distinguished and varied approvals:
- European Technical Approval ETA -05/0010 Option 1, applied to MMS-7.5; MMS-10; MMS-12; MMS-14 and MMS-16 in galvanised or Delta Protekt-coated steel.
- European Technical Approval ETA -05/0011 Option 1, applied to MMS-7.5; MMS-10 and MMS-12 in stainless steel.
HECO-MULTI-MONTI is also the proud holder of the prestigious Zulassung certification awarded by the German Institute for Construction Technology, valid for compressed or cracked concrete.
HECO-MULTI-MONTI has also been awarded a F120 fire-resistance rating for use on various materials such as concrete, limestone and solid bricks.
ART.288
L = 50 mm
Weight: 15,5 gr
ART.289
L = 60 mm
Weight: 17,5 gr
ART.290
L = 100 mm
Weight: 25,5 gr
The shank's considerable length ensures an excellent hold along the entire length of the hole and, much like a tapping screw, guarantees good strength distribution without exerting tension on the surrounding structure.
The only proviso is to use a bit which removes dust fragments from the drill hole, given that this must be 6mm width to 100mm depth.
To screw, use a 13mm hex key.
General Information:
MULTI-MONTI anchors are produced and patented by the German company HECO SCHRAUBEN KG & Co.
It is an innovative self-threading screw system and is highly resistant and practical.
The first part of the Multi-Monti thread is characterised by thread serration / teeth.
When screwed, the anchor cuts into the material and creates the space for the rest of the screw.
Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the material, reducing the risk of damage or breakage.
The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused.
This procedure should not be employed more than three times on rock and only once on granite.
The HECO-MULTI-MONTI system is very simple to install:
1) Drill into the supporting material (rock, concrete, solid bricks) with an appropriately sized bit (see table).
2) Clean the drill hole.
3) Screw in the anchor, fixing it to the chosen plate.
HECO-MULTI-MONTI was the first screw anchor to receive the highest level of the European Technical Approval ETA:
-Option 1 for use on cracked and uncracked concrete.
HECO-MULTI-MONTI is also the only screw anchor with such distinguished and varied approvals:
- European Technical Approval ETA -05/0010 Option 1, applied to MMS-7.5; MMS-10; MMS-12; MMS-14 and MMS-16 in galvanised or Delta Protekt-coated steel.
- European Technical Approval ETA -05/0011 Option 1, applied to MMS-7.5; MMS-10 and MMS-12 in stainless steel.
HECO-MULTI-MONTI is also the proud holder of the prestigious Zulassung certification awarded by the German Institute for Construction Technology, valid for compressed or cracked concrete.
HECO-MULTI-MONTI has also been awarded a F120 fire-resistance rating for use on various materials such as concrete, limestone and solid bricks.
ART.288
L = 50 mm
Weight: 15,5 gr
ART.289
L = 60 mm
Weight: 17,5 gr
ART.290
L = 100 mm
Weight: 25,5 gr
Product Length (cm):
0.00
Product Width (cm):
0.00
Product Height (cm):
0.00
Product Volumetric Weight (Kg):
0.00
Product Weight (Kg):
0.00
Product Final Weight (Kg):
0.00
ART.288 ART.289 ART.290
L = 50 mm L = 60mm L = 100 mm
Weight: 15,5 gr Weight: 17,5 gr Weight: 25,5 gr
L = 50 mm L = 60mm L = 100 mm
Weight: 15,5 gr Weight: 17,5 gr Weight: 25,5 gr
Add new comment